Ubnt download

Author: f | 2025-04-23

ubnt-systool hostname newname Set new hostname: ubnt-systool reboot: ubnt-systool reboot : Reboot device: ubnt-systool poweroff: ubnt-systool poweroff: Shutdown device: ubnt-systool reset2defaults: ubnt-systool reset2defaults : Factory reset device: ubnt-device-info summary: ubnt-device-info summary: Show system information: ubnt-tools ubnt

دانلود ubnt-discovery-v2.3 توسط ubnt

Post navigation Ping Watchdog is a feature that will automatically reboot a device if the specified IP address is unreachable.Here is a quick run down on enabling Ping Watchdog on Ubiquiti Radios from the command line.1. SSH into the radiossh [email protected]. Edit the config filevi /tmp/system.cfgFind the lines that start with pwdogAt a minimum, you will need to change the following two options:pwdog.status to enabledpwdog.host to the IP you want to ping. Add this line if it does not exist.pwdog.delay=300pwdog.host=192.168.1.1pwdog.period=300pwdog.retry=3pwdog.status=enabledYou can adjust the other options to your desired taste. Exit vi by hitting esc then typing in wq then hit Enter3. Save configurationFinally, save the configuration changes with/usr/etc/rc.d/rc.softrestart save Ubiquiti’s or UI’s GPONs do not have a SSH client by default. Or do they? If you type “ssh” and hit return, you’ll receive a “not found” error.Typically on devices like home routers, GPONs, UniFi AP’s etc, ssh is handled by Dropbear. Dropbear provides a Secure Shell compatible server and client and is typically used in embedded systems.To SSH from a GPON to another device, use dbclientdbclient [email protected] is the Dropbear client. AKA, SSH client. Who is this mcuser on ubiquiti devices? Nothing shows up in the radio config file about it, but the user shows up in /etc/passwdmcuser is used for AirControl2. If we look what is in the passwd file, we’ll notice that there is a ! at the beginning of the hash. Meaning that this password is disabled as the hash is not a proper hash. It’s only 10 characters long instead of the normal 13 for Unix DES hashes.mcuser:!VvDE8C2EB1:0:0::/etc/persistent/mcuser:/bin/sh is a valid ssh key, so the mcuser can ssh to the device without a password and do what it needs to do. Doing an ls on a device shows the following.Refer to the following article on removing AirControl Provisioning Ubiquiti changed up their download pages and it appears that there is not a page to download the AirGateway Pro firmware.The normal AirGateway and AirGateway LR use the same firmware. The Pro can use either 2.4 or 5Ghz frequencies and has a different firmware download.When we search for

Ubnt discovery v2.5.1 download

AirMAX - Guide to Configure a Point-to-Point Link (Layer 2, Transparent Bridge) This article provides the configuration needed to create a L2 point-to-point link. Find the steps on how to make this configuration for both AC and M devices below. The settings are very similar with just small modifications that will be pointed out for each configuration. Initial StepsConfiguration for Radio Labeled 192.168.1.2 Configuration for Radio Labeled 192.168.1.3User TipsNetwork DiagramInitial StepsPlease begin by restoring the radio to factory defaults. This is critical, especially if you are troubleshooting a problem.With your Windows PC or Mac computer configured to the 192.168.1.x subnet, connect it to the radio using an Ethernet cable.Using a web browser, enter 192.168.1.20 as the URL to gain access to the radio's management console.Enter ubnt as the administration account and ubnt as the password.This article bases its configuration instructions on the network diagram above, you will only need to change the elements mentioned, everything else should remain with its default values.Configuration for Radio Labeled 192.168.1.2 AC DevicesM Devices1. Choose the |Wireless| tab, and only change:Access Point: OnPTP Mode: On2. Choose the |Network| tab, and only change:IP Address: 192.168.1.2Click the Save button3. Reboot or power cycle the modem off and on before using this link for the first time.1. Choose the |Wireless| tab, and only change:Wireless Mode: Access PointWDS: [X] EnableClick the Change button2. Choose the |Network| tab, and only change:IP Address: 192.168.1.2Click the Change buttonClick the Apply button3. Reboot or power cycle the modem off and on before using this link for the first time.Configuration for Radio Labeled 192.168.1.3 AC DevicesM Devices1. Repeat steps 1 through 4 from the Initial Steps section.2. Choose the |Wireless| tab, and only change:Access Point: OffPTP Mode: On3. Choose the |Network| tab, and only change:IP Address: 192.168.1.3Click the Save button4. Reboot or power cycle

ubnt-discovery-v2.3 Download

Ago.Cracking the HashYou’ll need hashcat installed and setup to crack the hash. Kali Linux has hashcat included (you will just want to have the NVIDIA drivers installed for optimal performance). You can also check out installing hashcat on Fedora, or check out the hashcat website for other systems. the hashes of interest into a text file called hash.txtCommand to crack the passwords ./hashcat.bin -a 3 -m 1500 ./hash.txt -1?l?u ?1?1?1?1?1?1?1?1 -w 3 --session airgatewaythe -1?l?u let’s us specify a custom character list made up of -l and -u. Lower and Upper case letters. –session airgateway will record a checkpoint ever so often. So if our run gets interrupted, we can restore the session with./hashcat.bin --session airgateway --restoreRemediationFortunately, remediation is fairly simple.SSH into the affected device and open up the config filevi /tmp/system.cfgFind the lines that start with “users.3.”, delete them, and save the fileRun the following command to save the changes./usr/etc/rc.d/rc.softrestart save If you are not comfortable with the command line, then you can, through the web gui, download a backup, edit the backup file in a text editor, then upload/restore the backup.Other notesSomething else you may run across is a mcuser that shows up in /etc/passwd. This is typically a user used for AirControl, so if you have used AirControl in the past that is most likely why it is there. Check out the following article to remove the user. Install etherwake withapt install etherwake -yAfter it is installed, run etherwake with the target mac address. etherwake AA:BB:CC:00:11:22 Ubiquiti Airmax gear has tcpdump included. We can easily use it to capture packets to a file and then use SCP from the device to copy the file for analysis.SSH to the devicessh [email protected] /tmp/Start tcpdump with the following command. Change ath0 and file.cap to the appropriate interface and file name.tcpdump -i ath0 -w file.capAfter we are done collecting, we can quit with ctrl + cNow we can use scp or sftp to copy the files off. There is an issue using scp or sftp from a normal Linux machine to the radio, fails with a “sh: /usr/libexec/sftp-server: not found”. It. ubnt-systool hostname newname Set new hostname: ubnt-systool reboot: ubnt-systool reboot : Reboot device: ubnt-systool poweroff: ubnt-systool poweroff: Shutdown device: ubnt-systool reset2defaults: ubnt-systool reset2defaults : Factory reset device: ubnt-device-info summary: ubnt-device-info summary: Show system information: ubnt-tools ubnt ubnt-systool help: Show all commands: ubnt-systool cputemp: ubnt-systool cputemp: Show CPU Temp: ubnt-systool cpuload: ubnt-systool cpuload: Show CPU load: ubnt

librenms/mibs/ubnt/UBNT-AirMAX-MIB at master - GitHub

Are not using these configurations, you do not need to access the Configuration Portal. Page 18 ™ ™ Configuration Portal via LAN with DHCP If it is not already installed, download the Ubiquiti Device Discovery Tool (v2.3) at www.ubnt.com/download#app Launch the Ubiquiti Device Discovery Tool. A list of Ubiquiti devices on the network will appear. Page 19 Accessing the Configuration Portal Configuration Portal Interface Settings The login screen will appear. Enter ubnt in the Username and Password fields. Note: Once a device has been connected to the cloud, the Configuration Portal login information changes. The new username/password combination can be found on the Info tab in the cloud UI. Page 20 mPort ™ ™ Enter your configuration information on the Configuration tab: mFi Controller Enter the mFi Controller settings: a. Enter the mFi Controller address. • For local mFi Controller installations, this is the IP address and http port used by the Controller. (The port is usually 6080, for example: 192.168.25.161:6080 or mfi.acme.com:6080) •... Page 21 Accessing the Configuration Portal Wireless Settings To use the mPort on a Wi-Fi network, configure the Wireless Settings: a. Click Scan for a list of available SSIDs. Select the appropriate SSID or type in the name manually in the SSID field. b. Page 22: Specifications Products furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation under

UBNT-AC-TOOLKIT/README.md at main biostudio/UBNT-AC

Should look like this:clientdev tunproto udpremote 5.180.62.90 1194resolv-retry infiniteremote-randomnobindtun-mtu 1500tun-mtu-extra 32mssfix 1450persist-keypersist-tunping 15ping-restart 0ping-timer-remreneg-sec 0comp-lzo noremote-cert-tls serverauth-user-pass /config/openvpn/nordvpnauth.txtroute-nopullverb 3pullfast-iocipher AES-256-CBCauth SHA512-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----key-direction 1## 2048 bit OpenVPN static key#-----BEGIN OpenVPN Static key V1-----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-----END OpenVPN Static key V1-----4. Now, access your EdgeMax router via SSH: 5. Then perform these commands:sudo -icd /config/mkdir openvpnchmod 770 openvpn6. If you're using Linux, disconnect from SSH and copy the created “nordvpnauth.txt” and the downloaded “.ovpn” (in this case “de978.nordvpn.com.udp.ovpn”) files into your EdgeMax router's “/config/openvpn” directory via SCP:scp nordvpnauth.txt ubnt@routersIPaddress:/config/openvpnscp de978.nordvpn.com.udp1194.ovpn ubnt@routersIPaddress:/config/openvpnTo copy these files into the EdgeRouter while using Windows, upload them via SFTP. The default port for the SFTP connection is 22:7. Use SSH again to connect to your router and run the following commands (adjusting some lines according to your network and file names):configureset interfaces openvpn vtun0 config-file /config/openvpn/de978.nordvpn.com.udp.ovpnset interfaces openvpn vtun0 description 'OpenVPN VPN tunnel'commitset service nat rule 5000 description 'OpenVPN Clients'set service nat rule 5000 log disableset service nat rule 5000 outbound-interface vtun0set service nat rule 5000 source address 192.168.1.0/24set service nat rule 5000 type masqueradecommitset protocols static table 1 interface-route 0.0.0.0/0 next-hop-interface vtun0set firewall modify SOURCE_ROUTE rule 10 description 'traffic from 192.168.1.0/24 to vtun0'set firewall modify SOURCE_ROUTE rule 10 source address 192.168.1.0/24set firewall modify SOURCE_ROUTE rule 10 modify table 1set interfaces ethernet eth1 firewall in modify SOURCE_ROUTEcommitsaveNote: The last command can also be “ethernet eth2,” depending on which slot is used for the LAN cable, or “switch switch0” if you are using a switch interface.If you are using a different subnet (or want to set up the connection for specific devices only), modify 192.168.1.0/24 on all lines to your values.8. To check the connection log, type in:run show logScroll down until you see “Initialization sequence completed.” That means your router has successfully connected to our service. You can also

Ubnt Firmware 556 Download - hobbuher.yolasite.com

AirMAX - Guide to Configure a Point-to-Multipoint (PtMP) ISP-Style Access Point This article describes the configuration needed to create a Point-to-Multipoint (PtMP) link for airMAX devices. The instructions below offer the configuration for both AC and M devices. The settings are very similar with just small modifications that will be pointed out for the different platforms.IntroductionInitial ConfigurationConfiguration for Radio Labeled 192.168.1.2 (Access Point)Configuration for Radio Labeled 192.168.1.3 - 192.168.1.7 (Customer Radios)Configuration for the the Cable/DSL ModemAdditional Notes and TipsNetwork DiagramIntroductionPtMP links are used routinely to serve up to 100 locations from a single Access Point. There are many approaches to providing PtMP services. This example is the simplest, using a single Ubiquiti radio with an omnidirectional antenna to create a bridged network. Clearly, a more complex approach is often desired, one that uses multiple Ubiquiti radios with sector antennas along with a fully routed (rather than bridged) configuration. That however, is not the scope of this article. Most new users will benefit by starting with this simplified approach to become familiar with PtMP or to serve a smaller, limited area. Initial ConfigurationBefore following these steps, install a router as shown in the diagram above. Configure it as a DHCP server with an IP pool that is large enough to serve the number of customer devices (e.g. computers, printers, etc.) that will be served.Note: The pool should not extend lower than 192.168.1.21. The instructions for doing this are different for each router manufacturer; please consult their support documentation for assistance if needed.Restore the radio to factory default values. This is critical, especially when troubleshooting a problem. To perform a reset, press-and-hold the Reset button, power-on, release the Reset button when the lights begin to flash.Connect the radio to a computer using an Ethernet cable.Using a web browser, enter 192.168.1.20 as the URL to gain access to the radio's management console.Enter ubnt as the administration account and ubnt as the password.This article bases its configuration instructions on the network diagram above, only change the items mentioned, everything else should remain with its default values.Configuration for Radio Labeled 192.168.1.2 (Access Point) AC DevicesM Devices1. Choose the |Wireless| tab, and only change:Access Point: ONPTP Mode: Off2. Choose the |Network| tab, and only change:IP Address: 192.168.1.2Click the Save button1. Choose the |Wireless| tab, and only change:Wireless Mode: Access PointWDS: [X] EnableClick the Change button2. Choose the |Network| tab, and only change:IP Address: 192.168.1.2Click the Change. ubnt-systool hostname newname Set new hostname: ubnt-systool reboot: ubnt-systool reboot : Reboot device: ubnt-systool poweroff: ubnt-systool poweroff: Shutdown device: ubnt-systool reset2defaults: ubnt-systool reset2defaults : Factory reset device: ubnt-device-info summary: ubnt-device-info summary: Show system information: ubnt-tools ubnt