Micro soft net frame work

The release of .NET Micro framework v4.2 Beta brings Visual Basic support for the .NET Micro-framework. For those that have not heard of the Micro framework before “The .NET Micro Framework is .NET for small and resource constrained devices. It offers a complete and innovative development and execution environment that brings the productivity of modern computing tools to this class of devices.For current .NET developers, this means that they can now create applications that run on a range of devices from targeted devices like remote controls to PCs and Servers and on to the cloud – all with the same programming model and tools.For current Embedded developers, this means that they can now leverage the productivity gains that have been achieved on the desktop and reduce their time to market.The .NET Micro Framework is a fully integrated Visual Studio experience brings a reliable and productive development system to the embedded world.”Up until now the platform has been a C# only platform but the v4.2 Beta brings VB support. The support requires the installation of Visual Studio 2010 SP1 installations (Express versions support is not yet implemented fully). The VB support utilizes the work carried out by the ‘Compilers’ team for VBCore functionality and lights up another platform. This is exciting news for both the Compilers and the .NET Micro-framework teamsOther hardware vendor SDK’s will be available updating their SDK and providing specific VB project templates target 4.2, with Secret Labs already releasing a 4.2 Beta version of their SDK for the Netduino devices with VB support.This is really exciting news for anyone that wants to get into the area embedded microcontroller devices and wanting to leverage their VB skills and tinker with some electronics. VB developers can now be microcontroller developers.More info to follow…Download Location Addition InfoMicro-Framework Team Blog .NET Micro-framework Labs Netduino Author

Overview Taking key attributes and inspiration from the OW BOMMA, BOMMA THRUST is the new benchmark street-bike for those who demand an all-round performer for combos and traffic work. More Information Geometry (A) Top tube length 606mm (B) Head tube length 105mm (C) Standover 776mm (D) Reach 443mm (E) Stack height 571.5mm (F) Bottom Bracket 12.3 Geometry diagram Geometry Specs Frame Thrust 29 Forks Bomma Flanged 29 Handlebars Bomma 2 piece W762mm x H168mm Grips Lucky 6 Grips Headset 1 1/8” Integrated - Sealed bearings Stem Mafiabikes forged Topload - 50mm Reach Pedals 9/16” Mafiabikes plastic PP Saddle Mafiabikes Wheelie seat - Railed Seatpost Ø31.6mm micro adjust alloy Seat Clamp Ø35mm External QR Cranks 170mm forged direct mount alloy cranks - 24mm hollow spindle Chainring/sprocket front 32t Direct Mount Steel thick-thin Sprocket/cassette rear 11-36t 10spd Cassette Tyre Front Lagos Snakeskin "S" Super Soft Compound 29" x 2.5" Tyre Rear Lagos Snakeskin "S" Super Soft Compound 29" x 2.5" Front hub Alloy shell, 3/8" axle, sealed bearings Rear hub Alloy shell, 3/8" Axle, 10 Speed Freehub, Disc Rim front 29" 35mm Wide double wall alloy 36h Rim rear 29" 35mm Wide double wall alloy 36h Brake Front Side pull cable brake (supplied in roadkit) Brake Rear Shimano MT200 - hydraulic disc brake 160mm rotor Tech BB type 73mm ISO External (24mm) Headset type 1 1/8” integrated Rear axle/hub spacing 3/8" x 135mm axle Max tyre width rear 66mm / 2.6" Seatpost/seatclamp Ø31.6mm post, 35mm seatclamp Front axle/hub spacing 3/8" x 100mm axle Max tyre width front 66mm / 2.6" Frame construction and details 6061 T6 Aluminum, IS rear brake tab, heavy duty hydroformed downtube and chainstays, peg mount integrated dropouts Road kit Included Taking key attributes and inspiration from the OW BOMMA, BOMMA THRUST is the new benchmark street-bike for those who demand an all-round performer for combos and traffic work. With an emphasis on “buy it and ride-it” (no upgrades needed), We took our tried and tested geometry/know-how and packaged it into a lighter stiffer machine. We then wrapped that up in a selection of exciting new colourways to form

0-140, ECC 200), QrCode, PDF417, Micro QrCode, MicroPDF417, MaxiCode, Code 16K, RSS family(RSS-14 Standard, RSS-14 Truncated, RSS-14 Stacked, RSS-14 Stacked Omnidirectional, RSS Limited, RSS Expanded, RSS Expanded Stacked), etc..Category: Utilities / PrintersPublisher: Han-soft Corporation, License: Freeware, Price: USD $0.00, File Size: 465.0 KBPlatform: Windows IDAutomation's DataMatrix barcode fonts allow printing of ECC-200 Data Matrix symbols with TrueType, OpenType, PCL and PostScript fonts by using IDAutomation Vertical Interleaved Technology. Includes VB Code, Java Library, ASP.NET Web Control, .NET Forms Control DLL and examples for FileMaker Pro, Excel, Word, Access, OpenOffice, Java, .NET and Crystal Reports. Using Reed Solomon error..Category: Business & Finance / Inventory SystemsPublisher: IDAutomation.com, Inc., License: Demo, Price: USD $299.00, File Size: 3.8 MBPlatform: Windows Barcode Professional is a Windows control which generates barcode images for .NET Windows Forms Applications. Barcode Professional can generate the most popular Linear and 2D Barcode Symbologies. For .NET 1.0 or greater. Features: - Linear & 2D Barcode Symbologies - Crystal Reports for .NET support - Save barcode images in image files as well as in stream objects - GIF, BMP,..Category: Software DevelopmentPublisher: Neodynamic, License: Commercial, Price: USD $219.00, File Size: 834.9 KBPlatform: Windows

AI for the best sharpening results. Use Tack Sharp AI and NoNoise AI TogetherIf you have worked with noise reduction software, like NoNoise AI in Photo RAW, you know that correcting noise is a push and pull between smoothing out noise grain and maintaining detail. Sharpening is a similar balancing act, increasing crispness of details without over sharpening and boosting textures.ON1 Photo RAW has a Both tab in its Noise & Sharpening tab that puts the sliders of Tack Sharp AI side by side with the NoNoise AI control. Recall I mentioned Tack Sharp AI can introduce a speckled pattern, especially if Micro Sharpening is pushed too far? Well … in the Both tab, Tack Sharp AI and NoNoise AI are applied, and those speckled get balanced out. The net/net is the best of both worlds. A great improvement in sharpness without an increase in grain and noise.When your photo needs Ai sharpening, I advocate starting your work in the Both tab for the best results from Tack Sharp AI.Pro tip: Switch the NoNoise AI Model if the results don’t look good out of the gate. Improve your ON1 skills with these training titles Areas Of Improvement For Tack Sharp AITack Sharp AI does have some room for improvement. The sharpening Ai can be aggressive at times, and dialing back the Tack Sharp AI Deblur slider is not always the solution. In the photo below, my subject is soft. I was shooting handheld and it was relatively windy (and I also know I don’t have the steadiest of hands). I needed the full strength of Tack Sharp AI to get the sheep crisp and sharp. The tree line in the distance is over-sharpened. Fiddling with the Micro Sharpening slider helped some, although it became a tradeoff between maintaining the detail in the sheep’s wool versus over-sharpening the trees.Can I deal with this in ON1 Photo RAW in another way? Of course. Duplicate the layer, apply Tack Sharp AI to the upper layer, and then use a mask to remove the sharpening from the background. (And that gets much, much easier

Doesn’t seem to make a difference. Also I’m sure that I have the right COM port number, and it works over Tera Term with the same COM port I selected in FEZ Config or MFDeploy.I will check whether the deployed application makes a difference. My application does use another COM port. Not COM1, but the one that uses PD5 and PD6 (I forget the #). bfisher January 15, 2018, 9:15pm 11 Do you have a 10k pull up on Com1 RX? the only reason I ask is because the pinout on the data sheet says its required. It seems that when MFDeploy tries to use the serial port, it is being denied. No other running programs are using the serial port though, and I can close MFDeploy and open the port just fine in Tera Term. It seems that MFDeploy is blocking itself from using the port. Is this possible?Here is a log from my Serial Port Monitor by Eltima Software when I hit Target > Connect (F5) in MFDeploy:COM4#TimeFunctionDirectionStatusDataData (chars)Data lengthReq. lengthPort265415/01/2018 15:10:06IRP_MJ_CREATEDOWNSTATUS_SUCCESSC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4265515/01/2018 15:10:06IRP_MJ_CREATEUPSTATUS_ACCESS_DENIEDC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4265615/01/2018 15:10:06IRP_MJ_CREATEDOWNSTATUS_SUCCESSC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4265715/01/2018 15:10:06IRP_MJ_CREATEUPSTATUS_ACCESS_DENIEDC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4265815/01/2018 15:10:06IRP_MJ_CREATEDOWNSTATUS_SUCCESSC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4265915/01/2018 15:10:06IRP_MJ_CREATEUPSTATUS_ACCESS_DENIEDC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4266015/01/2018 15:10:06IRP_MJ_CREATEDOWNSTATUS_SUCCESSC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4266115/01/2018 15:10:06IRP_MJ_CREATEUPSTATUS_ACCESS_DENIEDC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4266215/01/2018 15:10:07IRP_MJ_CREATEDOWNSTATUS_SUCCESSC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4266315/01/2018 15:10:07IRP_MJ_CREATEUPSTATUS_ACCESS_DENIEDC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4266415/01/2018 15:10:07IRP_MJ_CREATEDOWNSTATUS_SUCCESSC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4266515/01/2018 15:10:07IRP_MJ_CREATEUPSTATUS_ACCESS_DENIEDC:\Program Files (x86)\Microsoft .NET Micro Framework\v4.3\Tools\MFDeploy.exeCOM4 No I don’t have a pullup on COM1 RX. I guess I missed the superscript 2 next to 69 in the pinout table. I will try this. I would love for the solution to be something so simple I can’t say definitively, but adding the 10 kOhm pullup resistor didn’t change anything the first few times I have tried it. I’m going to switch computers and try some more… PTSS January 16, 2018, 6:33am 15 Have you tried using the new ‘TinyCLR Config’ ?Ive often had trouble with FEZ Config on Windows 10, works fine, then for some reason chase tail for a bit before works again, often a reboot helps… RoSchmi January 16, 2018, 9:30am 16 Did you try to show hidden COM devices in device manager when the G80 is not connected and deinstall the used COM devices? @PTSS - I just installed TinyCLR Config and tried it. It does not suffer from the problem of being denied access to the serial port. I can select the COM port and hit the “Connect” button, and it opens the COM port successfully.I can even then close TinyCLR Config, open MFDeploy and try to connect - which will fail with “STATUS_ACCESS_DENIED”, and then open TinyCLR

Image resolution. Document doc = new Document(getMyDir() + "Rendering.docx"); SvgSaveOptions saveOptions = new SvgSaveOptions(); saveOptions.setMaxImageResolution(72); doc.save(getArtifactsDir() + "SvgSaveOptions.MaxImageResolution.svg", saveOptions); Shows how to work with soft edge formatting. DocumentBuilder builder = new DocumentBuilder(); Shape shape = builder.insertShape(ShapeType.RECTANGLE, 200.0, 200.0); // Apply soft edge to the shape. shape.getSoftEdge().setRadius(30.0); builder.getDocument().save(getArtifactsDir() + "Shape.SoftEdge.docx"); // Load document with rectangle shape with soft edge. Document doc = new Document(getArtifactsDir() + "Shape.SoftEdge.docx"); shape = (Shape)doc.getChild(NodeType.SHAPE, 0, true); // Check soft edge radius. Assert.assertEquals(30, shape.getSoftEdge().getRadius()); // Remove soft edge from the shape. shape.getSoftEdge().remove(); // Check radius of the removed soft edge. Assert.assertEquals(0, shape.getSoftEdge().getRadius()); Returns:SoftEdgeFormat - Soft edge formatting for the shape.getTarget()public String getTarget()Gets the target frame for the shape hyperlink.Remarks:The default value is an empty string.Examples:Shows how to insert a shape which contains an image, and is also a hyperlink. Document doc = new Document(); DocumentBuilder builder = new DocumentBuilder(doc); Shape shape = builder.insertImage(getImageDir() + "Logo.jpg"); shape.setHRef(" shape.setTarget("New Window"); shape.setScreenTip("Aspose.Words Support Forums"); // Ctrl + left-clicking the shape in Microsoft Word will open a new web browser window // and take us to the hyperlink in the "HRef" property. doc.save(getArtifactsDir() + "Image.InsertImageWithHyperlink.docx"); Returns:java.lang.String - The target frame for the shape hyperlink.getText()public String getText()Gets the text of this node and of all its children.Remarks:The returned string includes all control and special characters as described in ControlChar.Examples:Shows the difference between calling the GetText and ToString methods on a node. Document doc = new Document(); DocumentBuilder builder = new DocumentBuilder(doc); builder.insertField("MERGEFIELD Field"); // GetText will retrieve the visible text as well