Download tr 069 manager

Author: a | 2025-04-25

TR-069 Setup. TR-69 Message Flow. API Documentation. Refer the TR-069 Interface Specification to know more about on the following topics, TR-069 Device Management; TR-069 Diagnostics; TR-069 Firmware Download; TR-069 Gathering Periodic Information; TR-069 Host Interface Specifications; TR-69 Training (Overview on CPE WAN Management Protocol) The HeMS comprises a TR-069 Manager and an file server. The TR-069 Manager corresponds to the TR-069 Auto-Configuration Server (ACS) function as defined in TR-069 specification [7].

Manage Devices with TR-069

From Teltonika Networks Wiki Main Page > TRB Gateways > TRB140 > TRB140 Manual > TRB140 WebUI > TRB140 Services section > TRB140 TR-069The information in this page is updated in accordance with firmware version TRB1_R_00.07.13.1.SummaryTR-069 (Technical Report 069) is an application layer protocol designed for management of equipment connected to a remote network.This chapter of the user manual provides an overview of the UPnP page in TRB140 devices.TR-069 is additional software that can be installed from the System → Package Manager page.TR-069 Client Configuration Field Value Description Enable off | on; default: off Turns TR-069 client on or off. Periodic enable off | on; default: on Turns periodic data transmissions to server on or off. Accept server request off | on; default: off When enabled the device accepts connection requests from servers. Sending interval integer [60..9999999]; default: 100 Periodic data transmission frequency (in seconds). Username string; default: easycwmp Username used for authentication to a TR-069 server. Password string; default: easycwmp Password used for authentication to a TR-069 server. URL host | ip; default: IP address or hostname of a TR-069 server. Management via TR-069TR-069 can be used to set or get values from RUT devices. Below is a list of commands used for device management via TR-069. R - read only; RW - read/write; string(64) - 64 bit string; string(256) - 256 bit string; unsignedInt - integer storing only positive values.Device Information: DeviceInfo.HardwareVersion - device hardware version (e.g., 0201) R DeviceInfo.Manufacturer - device manufacturer (e.g., Teltonika) R DeviceInfo.ManufacturerOUI - organizationally unique identifier of the device manufacture (e.g., 001E42) R DeviceInfo.ProductClass - device model (e.g., TRB140) R DeviceInfo.ProvisioningCode - provisioning code R DeviceInfo.SerialNumber - device serial number (e.g., 1000111111) R DeviceInfo.SoftwareVersion - device software version (e.g., TRB1_R_00.0X.XX) R DeviceInfo.SpecVersion - device special version (e.g., 1.0) RDevice Mobile Information: MobileInfo.Modem.1-1.CellID - cell ID MobileInfo.Modem.1-1.ConnState - connection state (e.g., Connected) R MobileInfo.Modem.1-1.ConnType - connection type (e.g., LTE) R MobileInfo.Modem.1-1.EARFCN - absolute radio frequency channel number (e.g., 75) R MobileInfo.Modem.1-1.ECIO - signal, measured in dB R MobileInfo.Modem.1-1.ICCID - SIM ICCID R MobileInfo.Modem.1-1.IMEI - modem IMEI R MobileInfo.Modem.1-1.IMSI - international mobile subscriber identity R

TR-369/TR-069 Remote Management

Step 12 cwmp agent Example:Device(config)# cwmp agent Enables TR-069 Agent configuration mode. Step 13 enable download Example:Device(config-cwmp)# enable download (Optional) Enables the CPE to permit a software download. By default, this command is disabled. Step 14 session retry limit session-count Example:Device(config-cwmp)# session retry limit 10 (Optional) Sets the session retry count whenever the TR-069 session establishment fails with the ACS. The range for the session count argument is 0 to 15. The default value is 11. Step 15 request outstanding request-count Example:Device(config-cwmp)# request outstanding 6 (Optional) Sets the count for the number of requests that can be sent by CPE to ACS without receiving the acknowledgement. The range for the request count argument is 0 to 10. The default value is 5. Step 16 parameter change notify interval time-interval Example:Device(config-cwmp)# parameter change notify interval 75 (Optional) Sets the time interval, in seconds, for the parameter change notifications. The range for the time interval argument is 15 to 300. The default value is 60. Step 17end Example:Device(config-cwmp)# end Exits TR-069 Agent configuration mode and returns to privileged EXEC mode. What to Do NextProceed to Enabling the TR-069 Agent on the CPE task. Enabling the TR-069 Agent on the CPEBefore You BeginYou must have set up the CPE as specified in the Setting Up the CPE to Communicate with the ACS task. SUMMARY STEPS1. enable 2. configure terminal 3. cwmp agent 4. enable 5. end DETAILED STEPS Command or ActionPurposeStep 1 enable Example:Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example:Device# configure terminal Enters global configuration mode. Step 3 cwmp agent Example:Device(config)# cwmp agent Enables TR-069 Agent configuration mode. Step 4 enable Example:Device(config-cwmp)# enable Enables the CPE to initiate a TR-069 session with the ACS. Step 5end Example:Device(config-cwmp)# end Exits TR-069 Agent configuration mode and returns to privileged EXEC mode. Initiating a TR-069 Agent Session from the ACSBefore You BeginYou must have set up the CPE by using Setting Up the CPE to Communicate with the ACS task and enabled the TR-069 Agent on the CPE by using the Enabling the TR-069 Agent on the CPE task. SUMMARY STEPS1. enable 2. configure terminal 3. cwmp agent 4. connection request username username 5. connection request username [ encryption-type | cleartext-password ] passwd 6. end DETAILED STEPS Command or ActionPurposeStep 1 enable Example:Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal

TR-069 TR-369 Device Management

FAQ How do I buy the products? You can get products in offline stores or online retailers according to the above sheet. Contact sales if you need special firmware or when you want to buy in bulk. How do I prepare to deploy TR-069 in my network? Deploying TR-069 requires compatible CPE devices and ACS. Tech specialists are needed for the maintenance of ACS. If you simply want to boost your deployment, you may look for Aginet Config. How do I enable auto-configuration on TR-069 devices? Set the ACS address, profile info (username and password) for devices in advance to enable auto-configuration. TP-Link recommends using Aginet Config to deploy the ACS settings efficiently. Does TP-Link offer an official ACS solution for TR-069 products? If you are looking for the ACS solution provided by TP-Link, you may check out Aginet ACS offered by a TP-Link Service Provider. The products supported by Aginet ACS differ from those listed on this page.. TR-069 Setup. TR-69 Message Flow. API Documentation. Refer the TR-069 Interface Specification to know more about on the following topics, TR-069 Device Management; TR-069 Diagnostics; TR-069 Firmware Download; TR-069 Gathering Periodic Information; TR-069 Host Interface Specifications; TR-69 Training (Overview on CPE WAN Management Protocol)

TR-069 Manager for Windows - CNET Download

The value in Cisco ISR G2; only one storage path and it is the flash memory. ntp server 100.12.12.1 YES (no archive) YES (configure archive) Prerequisites for the TR-069 Agent The CPE should have an IP address and a WAN connection should be established to access the ACS. Information About the TR-069 AgentTR-069 AgentHTTP Digest Authentication SupportHTTP Cookie Support Per RFC2965Device Gateway Association and Port Mapping SupportTR-069 Agent The TR-069 Agent allows an ACS to provision a CPE or collection of CPEs. The provisioning mechanism includes specific provisioning parameters and a general mechanism for adding vendor-specific provisioning capabilities as needed. The identification mechanisms included in the protocol allow CPE provisioning based either on the requirements of each specific CPE, or on collective criteria such as the CPE vendor, model, software version, or other criteria. The provisioning mechanism allows CPE provisioning at the time of initial connection to the broadband access network and the ability to reprovision at any subsequent time. This includes support for asynchronous ACS-initiated reprovisioning of a CPE. The TR-069 Agent also supports image upgrade, configuration application, file downloads, configuration and log file uploads, and CPE monitoring. Note The TR-069 Agent CPE devices must be set up and enabled for TR-069. An ACS used to communicate with the CPE must be TR-069 compliant in order to enable the TR-069 Agent. RPC Support The following remote procedure calls (RPCs) supported with the TR-069 Agent: Standard RPCs GetRPCMethods SetParameterValues GetParameterValues GetParameterNames SetParameterAttributes GetParameterAttributes AddObject DeleteObject Reboot Download Upload Vendor RPCs X_00000C_SetConfiguration X_00000C_ShowStatus CWMP Vendor Profile Schema The following details the CWMP vendor profile schema: For SetConfiguration, rollback {running-config | startup-config} block of clis separated by newline [\n] character IOS Configuration command 1 IOS Configuration command 2 parameterkey ErrorOption => string with length 64Target => string with length 64 On success, 0 On failure, ClientCWMP fault IOS Configuration command that failedparse_cmd() return value IOS Configuration command that failedparse_cmd() return value For ShowStatus, IOS Exec command 1 IOS Exec command 2 IOS Exec command 3 On success, IOS Exec command 1 output of command 1 IOS Exec command 2 output of command 2 IOS Exec command 3 output of command 3 On failure, ClientCWMP fault HTTP Digest Authentication Support The TR-069 Agent uses HTTP as the transport and needs support for digest authentication from the HTTP client infrastructure. Note This feature is not a TR-069 Agent-exclusive feature and can be used in

TR-069 Manager 2.2 - Download, Review

DOWNLOAD event occurs when the CPE is establishing a session in which it intends to call the RequestDownload RPC on the ACS.11 DU STATE CHANGE COMPLETE, 12 AUTONOMOUS DU STATE CHANGE COMPLETE The 11 DU STATE CHANGE COMPLETE and 12 AUTONOMOUS DU STATE CHANGE COMPLETE events refer to the Software Module Management functions enabled by TR-069, and are triggered with a Deployment Unit (the technical term for an Application on the CPE) changes its state (for instance, from Installed to Uninstalled).13 WAKEUPThe 13 WAKEUP event is triggered when a device that has a low-power or “Sleep” mode of operation comes back online.M or Method EventsIn addition to these events are events labeled with “M” for “Method”. These events occur in tandem with other TR-069 events to state explicitly that it was a TR-069 RPC that was the cause of the event. These include:M RebootM Reboot, when paired with the 1 BOOT event, indicates that the device rebooted because the ACS used the Reboot RPC.M Scheduled InformM ScheduledInform always occurs whenever the 3 SCHEDULED event occurs.M DownloadM Download occurs with 7 TRANSFER COMPLETE when a Download triggered by the Download RPC completes, and similarly with “M ScheduleDownload” and M Upload.M ChangeDUStateM ChangeDUState is paired with the DU STATE CHANGE COMPLETE event when the change was due to the use of the ChangeDUState RPC.These are all of the standardized TR-069 events. Vendors can define their own using vendor extensions.Building or deploying TR-069?Develop your solution even faster with the industry standard in automated, expert testing.Learn more

TR-069 Manager 1.4 Download - TR069Manager.exe

To the Cisco IOS Network Management Command Reference. SUMMARY STEPS1. enable 2. configure terminal 3. cwmp agent 4. management server url acs-url 5. management server password [encryption-type | cleartext-password] passwd 6. provision code code-string 7. exit 8. interface type number 9. cwmp wan 10. cwmp wan default 11. exit 12. cwmp agent 13. enable download 14. session retry limit session-count 15. request outstanding request-count 16. parameter change notify interval time-interval 17. end DETAILED STEPS Command or ActionPurposeStep 1 enable Example:Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example:Device# configure terminal Enters global configuration mode. Step 3 cwmp agent Example:Device(config)# cwmp agent Enables TR-069 Agent configuration mode. Step 4 management server url acs-url Example:Device(config-cwmp)# management server url Example:Device(config-cwmp)# management server url Specifies the HTTP/HTTPS URL to reach the ACS. This URL is used by the CPE to establish the TR-069 session with the ACS. Step 5 management server password [encryption-type | cleartext-password] passwd Example:Device(config-cwmp)# management server password 0 cisco Specifies the CPE password that is used in the authentication phase. This password will be provided to the ACS when the CPE is challenged for credential as part of authentication during the session establishment. Step 6 provision code code-string Example:Device(config-cwmp)# provision code ABCD Specifies the provision code to be used by the CPE. Step 7 exit Example:Device(config-cwmp)# exit Exits TR-069 Agent configuration mode and returns to global configuration mode. Step 8 interface type number Example:Device# interface serial 0/0 Enters interface configuration mode. Step 9 cwmp wan Example:Device(config-if)# cwmp wan (Optional) Defines the WAN interfaces on the CPE. Note Any interface without this command is considered a LAN interface by TR-069 protocol. There can be multiple WAN and LAN interfaces configured on the CPE. By default, an ATM interface on the CPE will be considered a WAN interface by the TR-069 protocol. Step 10 cwmp wan default Example:Device(config-if)# cwmp wan default Defines the default WAN interfaces on the CPE device. Note Among the multiple WAN interfaces, there can be only one default WAN interface in which the TR-069 communication could happen. If you try to configure this command on multiple interfaces, only the latest configuration will be active and the previous default WAN interface will become a WAN interface, ensuring only one interface is the default at any point in time. Step 11 exit Example:Device(config-if)# exit Exits interface configuration mode and returns to global configuration mode.

Transparent TR-069 Management Agent.

TR-069 AgentThe digital subscriber line (DSL) Forum's TR-069, CPE WAN Management Protocol (CWMP), is used for communications between a customer premise equipment (CPE) and an auto-configuration server (ACS). The TR-069 Agent feature manages a collection of CPEs, with the primary capability for auto-configuration and dynamic service provisioning, software image management, status and performance monitoring and diagnostics. Finding Feature InformationLimitations for the TR-069 AgentPrerequisites for the TR-069 AgentInformation About the TR-069 AgentHow to Configure and Enable the TR-069 AgentConfiguration Examples for TR-069 AgentAdditional References for TR-069 AgentFeature Information for TR-069 AgentGlossaryFinding Feature Information Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required. Limitations for the TR-069 AgentThe following table provide the limitations of the parameters in TR-069.Table 1 TR-069 Parameters TR-069 Parameter Expected Value Supported on Cisco ISR G2 Supported on Cisco 4451 InternetGatewayDevice. WANDevice.2. WANConnectionDevice.1.WANIPConnection.1.Uptime Time No No Internet gatewy device. WAN device2. WAN common interface config enabled. For Internet registration entry for Internet gateway device. WAN device. WAN common Interface configuration does not include the parameter enabled for Internet. True or Flase No No InternetGatewayDevice.DeviceInfo.SoftwareVersionentPhysicalSoftwareRev for the Cisco ISR4451 Chassis is NULL, hence InternetGatewayDevice.DeviceInfo.SoftwareVersion is also NULL Version Yes No WAN access type is DSL (Internet gateway device. WAN device2. WAN common interface configuration. WAN access type) The WAN DSL interface configuration data is populates when the WAN access type is Ethernet (Internet Gateway device. WAN device. WAN common interface configuration interface config. WAN access type). The WAN Ethernet interface configuration date populates. Populate the details Yes Yes InternetGatewayDevice.Layer3Forwarding.Forwarding.1.MTUregistration entry for InternetGatewayDevice.Layer3Forwarding.Forwarding. does not include the parameter MTU MTU value No No Internet gateway device. Layer 3 forwarding. Forwarding 1. MTU registration entry for Internet gateway device. Layer 3 forwarding. Forwarding does not include the parameter MTU. MTU value No No Set parameter values- Internet gateway device. Time. NTP server 5 in Cisco 4451, config t, archive, path boot flash should be configured to set. TR-069 Setup. TR-69 Message Flow. API Documentation. Refer the TR-069 Interface Specification to know more about on the following topics, TR-069 Device Management; TR-069 Diagnostics; TR-069 Firmware Download; TR-069 Gathering Periodic Information; TR-069 Host Interface Specifications; TR-69 Training (Overview on CPE WAN Management Protocol) The HeMS comprises a TR-069 Manager and an file server. The TR-069 Manager corresponds to the TR-069 Auto-Configuration Server (ACS) function as defined in TR-069 specification [7].

Registering and Managing TR-069 Devices

Lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required. Table 2 Feature Information for TR-069 Agent Feature Name Releases Feature Information TR-069 Agent The TR-069 Agent feature manages a collection of CPEs, with the primary capability for auto-configuration and dynamic service provisioning, software image management, status and performance monitoring and diagnostics. The following commands were introduced or modified: cwmp agent, cwmp wan, cwmp wan default, debug cwmp, enable, enable download, management server password, management server url, parameter change notify interval, provision code, request outstanding, session retry limit, show cwmp map, show cwmp methods, show cwmp parameter, show cwmp persistent, show cwmp session. Glossary ACS--auto-configuration server. CPE--customer premise equipment.

Manage Devices with TR-069

Every TR-069 session is initiated by a CWMP Endpoint on a CPE. These sessions always occur for a specific reason, called an “Event”. All of the Events that have yet to be delivered to the ACS are contained as arguments in the Inform RPC at the start of every TR-069 session.Here’s a CDRouter Log of a TR-069 session. You can see that the Inform sent by the CPE contains an array of type “EventStruct”. This array contains one or more event codes that tell the ACS why the CPE is making contact.Here it has one event code, “6 CONNECTION REQUEST”, which means that this session was established because of an explicit action from the ACS. More on that later.Types of Events 0 BOOTSTRAPThe most fundamental is 0 BOOTSTRAP. This event tells the ACS that the CPE is contacting it either for the first time or because the URL of the ACS has changed. When an ACS receives a BOOTSTRAP event, it will often begin a series of initial configuration steps on the CPE.1 BOOTThe 1 BOOT event is sent by the CPE any time its software has been restarted, usually because of a physical reboot.2 PERIODICThe 2 PERIODIC event is sent whenever the CPE’s PeriodicInformInterval expires. This is used to ensure that the CPE contacts the ACS on a regular, planned interval, and is controlled through the device’s data model using the PeriodicInformInterval, PeriodicInformTime, and PeriodicInformEnable parameters.3 SCHEDULEDThe 3 SCHEDULED event is based on the specific use of the ScheduleInform RPC.4 VALUE CHANGEThe 4 VALUE CHANGE event occurs when a parameter that has been marked for Passive or Active Notification changes.6 CONNECTION REQUESTThe 6 CONNECTION REQUEST event occurs when an ACS uses the special connection request mechanism to trigger the CPE to begin a TR-069 session.7 TRANSFER COMPLETE and 10 ANONYMOUS TRANSFER COMPLETEThe 7 TRANSFER COMPLETE event occurs when the CPE has successfully downloaded or uploaded a file that the ACS needs to know about. This is most often because of a use of the Download or Upload RPCs. The 10 ANONYMOUS TRANSFER COMPLETE event occurs when a transfer completes that was not requested by the ACS, but that the ACS wishes to know about.8 DIAGNOSTICS COMPLETEThe 8 DIAGNOSTICS COMPLETE event occurs when the CPE has completed one or more diagnostic tests that are defined in, and activated through, the TR-069 data model of the CPE.9 REQUEST DOWNLOADThe 9 REQUEST. TR-069 Setup. TR-69 Message Flow. API Documentation. Refer the TR-069 Interface Specification to know more about on the following topics, TR-069 Device Management; TR-069 Diagnostics; TR-069 Firmware Download; TR-069 Gathering Periodic Information; TR-069 Host Interface Specifications; TR-69 Training (Overview on CPE WAN Management Protocol) The HeMS comprises a TR-069 Manager and an file server. The TR-069 Manager corresponds to the TR-069 Auto-Configuration Server (ACS) function as defined in TR-069 specification [7].

TR-369/TR-069 Remote Management

Up the CPE to Communicate with the ACSExample: Configuring and Enabling CWMP using the Autoinstall featureExample: Setting Up the CPE to Communicate with the ACS The following example shows how to set up the CPE to communicate with the ACS. The ACS URL is and the password is lab. !configure terminal cwmp agent management server url management server password 0 lab provision code ABCD exit interface ethernet 0/0 cwmp wan cwmp wan default exit cwmp agent enable download session retry limit 12 request outstanding 3 parameter change notify interval 120 !Example: Configuring and Enabling CWMP using the Autoinstall feature The following example shows how to configure CWMP using the autoinstall feature. Use the following set of commands in the network-config file or -config file or router-config file in the TFTP server. No additional manual configuration is required for configuring CWMP on the device. !cwmp agent enable enable download management server password lab management server url connection request username user1 connection request password lab!ip http server!Additional References for TR-069 Agent The following sections provide references related to the TR-069 Agent feature. Related Documents Related Topic Document Title TR-069 Agent commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples Cisco IOS Network Management Command Reference Cisco IOS commands Cisco IOS Master Commands List, All Releases Standards Standard Title No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature. -- MIBs MIB MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http:/​/​www.cisco.com/​go/​mibs RFCs RFC Title No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature. -- Technical Assistance Description Link The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. http:/​/​www.cisco.com/​cisco/​web/​support/​index.html Feature Information for TR-069 Agent The following table provides release information about the feature or features described in this module. This table